Factory-direct-hardware Hansgrohe 10402001 Axor Starck X Uživatelský manuál stáhnout pdf (Strana 5)

• Remove the handle screw. Pull the

green high temperature limit stop

straight off the cartridge.

• Reinstall the high temperature limit stop

so that the positioning pin on the

cartridge is in the hole for the desired

high temperature. The temperatures

shown on the diagram assume an

incoming cold water temperature of

F and an incoming hot water

temperature of 140

• Test the unit. Reposition the high

temperature limit stop again if required.

• Reinstall the nut cover. Reinstall the

handle screw and tighten four complete

turns. Reinstall the handle and continue

tightening the screw. Reinstall the screw

cover.

1 Handle 10490XXX

1.1 Screw cover 96338000

2 Flange 96395000

3 Nut 96461000

4 Cartridge 92730000

5 Flange 96467000

6 S-connector

7 Diverter 94077000

8 Diverter knob 96466XXX

9 Check valve 94074000

10 noise reducer 96429000

11 hose 28282XXX

12 screen washer

13 handshower 28531XXX

14 spray former 97467000

XXX = color

000 = chrome

1.1

Replacement Parts

1 2 3 4 5 6 7 8

Žádné komentáře

Factory-direct-hardware Hansgrohe 10402001 Axor Starck X Uživatelský manuál Strana 5